Adaptec USB2connect Host Bus Adapter manual Close the computer cabinet and reattach the power cord

Installing USB2connect

4Replace the slot cover screw. When installed properly, the card should be level with the expansion slot.

5Close the computer cabinet and reattach the power cord.

The USB2connect AUA-5100 adapter shares one internal and external connector so that only five can be used at one time. The default setting is that all external connectors are Enabled, and the internal connector is Disabled. To switch these settings so that the internal port is enabled, set the jumpers according to the figure below.

Changing jumpers on the AUA-5100:

jumpers

External Port Enabled (default)

All 5 external ports enabled

disabled

Internal Port Enabled	jumpers
	enabledenabled
	disabled
	These 4
	ports
	enabled

5