Adaptec USB2connect Host Bus Adapter manual Installing the Macintosh Driver

USB2connect User’s Guide

Installing the Macintosh Driver

1Power up the computer. Insert the USB2connect CD into your CD-ROM drive.

2Double-click the Start Installation Here file on the CD.

3Follow the instructions to install the latest Macintosh USB drivers, if necessary.

4Double-click the USB2connect Installer file and follow the instructions.

5After the installation is complete, click Restart if necessary to have the new settings take effect.

Note: USB2connect does not support Deep Sleep on Power Macintosh G4 systems. The Deep Sleep option is disabled when you install the USB2connect driver. If you need to uninstall the USB2connect driver from a Power Macintosh G4, remove the file shown below from your Extensions folder.

On Power Macintosh G4s, you will see the following message when you try to put it into Deep Sleep and the USB2connect driver is installed:

18