NOTE: To reset the Direct Spark Ignition (DSI) module if it is in the LOCKOUT mode, open and close the main door, then restart the dryer.

(a)To check and/or set the 1/8” gap, use a DSI Ignitor gap feeler gauge (refer to the illustration on page 41) or similar type device to determine the gap size. DO NOT USE FEELER GAUGE TO SET GAP, use it only to determine the size of the gap. If an adjustment is necessary, bend the ground rod to achieve the correct gap, then recheck the 1/8” GAP with a feeler gauge.

(b)The alignment of the ignitor/flame-probe assembly in relation to the gap on the ignitor electrode/ground rod must be maintained in as vertical (straight line) a position as possible (refer to the illustration below) otherwise the DSI module will indicate system malfunction and go into the LOCKOUT mode (L.E.D. will BLINK “GREEN”

CONTINUOUSLY).

NOTE: To reset the DSI module if it is in the LOCKOUT mode, open and close the main door, then restart the dryer.

(c)The positioning of the ignitor/flame-probe assembly is extremely important because it provides the necessary feedback information to the DSI module. The flame-probe electrode must be positioned 1/4” minimum into the flame path (refer to the illustration below) and must be positioned 1-inch (2.54 cm) maximum from the burner tube (refer to the illustration below), otherwise, the DSI module will indicate a system malfunction and go into the LOCKOUT mode (L.E.D. will LIGHT “RED”

CONTINUOUSLY).

NOTE: To reset the DSI module if it is in the LOCKOUT mode, open and close the main door, then restart the dryer.

3)Air Turbulence

If there is sail switch flutter due to air turbulence or improper impellor rotation and/or a restriction in the exhaust ductwork, the DSI module will cycle erratically. This in turn might cause the DSI module to LOCKOUT (where the L.E.D. will BLINK “GREEN” CONTINUOUSLY).

a)If air turbulence causes the flame to move away from the flame-probe electrode (of the ignitor/ flame-probe assembly), or if the flame goes out completely during the heat (flame) cycle, the DSI module will attempt to reestablish a flame by going into a reignition cycle.

42

Page 45 Page 47
Page 46
Image 46
ADC AD-360X2 manual Continuously
Page 45 Page 47

AD-360X2 specifications

The ADC AD-360X2 is a high-performance audio component designed for audiophiles and professionals who demand quality and reliability. This digital-to-analog converter (DAC) is engineered to deliver superior sound quality, with an emphasis on precision and clarity.

One of the standout features of the AD-360X2 is its dual DAC architecture, which utilizes two high-end digital-to-analog chips to ensure a pristine audio output. This design not only enhances the audio resolution but also minimizes noise and distortion, resulting in a richer listening experience. The device supports high-resolution formats, including DSD and PCM, enabling users to enjoy their music in the highest quality available.

The AD-360X2 also boasts a wide range of connectivity options, allowing it to interface seamlessly with various audio devices. It includes USB, optical, and coaxial inputs, making it compatible with computers, CD players, and digital media players. This versatility means that users can easily integrate the AD-360X2 into their existing audio setup, enhancing their overall experience.

Another impressive characteristic of the AD-360X2 is its built-in headphone amplifier. This feature allows users to connect their headphones directly to the unit, providing an optimized listening experience without the need for additional equipment. The headphone amplifier is designed to drive a wide range of headphone impedances, ensuring compatibility with everything from high-impedance studio headphones to more consumer-oriented options.

Additionally, the AD-360X2 integrates advanced clock technology to enhance timing accuracy. The precision clock circuit works to reduce jitter, which is often a major source of distortion in digital audio systems. By ensuring that the signal is processed with impeccable timing, the device further elevates audio quality.

User-friendliness is another significant aspect of the AD-360X2. The device features a straightforward control interface, with an easy-to-read display that provides real-time information about the audio being played. This simplicity ensures that both novices and seasoned audio enthusiasts can operate the device with ease.

In conclusion, the ADC AD-360X2 is an exemplary digital-to-analog converter that combines high-end audio performance with user-friendly features. Its dual DAC architecture, extensive connectivity options, built-in headphone amplifier, and advanced clock technology make it a standout choice for anyone seeking to elevate their audio experience. Whether for personal use or professional applications, the AD-360X2 is engineered to meet and exceed the expectations of discerning audio lovers.
Top Page Image Contents