Input connection wiring must be sized properly to handle the dryer’s current draw. This information is printed on the dryer’s data label.

Electric Models Only

Single-Phase (1ø) Wiring Connections / Hookup

3-Phase (3ø) Wiring Connections / Hookup

Gas Information ______________________

It is your responsibility to have all plumbing connections, materials, and workmanship conform to local and state regulations or codes of the country of destination. In the absence of such codes, all plumbing connections, materials, and workmanship must conform to the applicable local requirements. In the USA this is the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGAB149.2-M91 (L.P. Gas) or LATEST EDITION.

In Australia, the fuel gas code is AS 5601/AG 601, local authority, gas, electricity, and any other relevant statutory regulations.

It is important that gas pressure regulators meet applicable pressure requirements, and that gas meters be rated for the total amount of all the appliance Btu being supplied.

Important: Failure to comply with these codes or ordinances, and/or the requirements stipulated in this manual, can result in personal injury and improper operation of the dryer.

For ease of service, the individual gas supply line of each dryer must have its own manual shutoff valve.

The dryer and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa) for non-CE dryers or 50 mb for CE dryers.

Failure to isolate or disconnect the dryer from supply as noted can cause irreparable damage to the gas valve, voiding the warranty.

Note: The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply system at test pressures equal to or less than 1/2 psig (3.5 kPa) for non- CE dryers or 50 mb for CE dryers.

Warning

!Fire or explosion could result due to failure of isolating or disconnecting the gas supply as

noted.

Note: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the data label and pressure must be confirmed. If this information does not agree with the type of gas available, do not operate the dryer. Contact the reseller who sold the dryer or contact the manufacturer.

The input ratings shown on the data label are for elevations up to 2,000 feet (610 meters), unless elevation requirements of over 2,000 feet (610 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (610 meters) is made by changing each burner orifice. If this conversion is necessary, contact the reseller who sold the dryer or contact the manufacturer.

Important: If connection to this appliance is made with a flexible hose, it must be suitable for the appliance category in accordance with national installation regulations of the country of destination, and if in doubt the installer must contact the supplier. The manufacturer of this appliance does not recommend the use of flexible gas supply line/ hose. An external gas supply shutoff must be provided.

CE and Australian Dryers

There is an N.P.T. to B.S.P.T. adaptor included with each dryer, which must be installed to the gas inlet. The adaptor is shipped in the tumbler.

Important: Pipe joint compounds that resist the action of natural, propane, and butane gases must be used.

113615 -2

www.amdry.com

13

Page 12 Page 14
Page 13
Image 13
ADC HBG76 manual Gas Information, CE and Australian Dryers
Page 12 Page 14

HBG76 specifications

The ADC HBG76 is a state-of-the-art device designed for high-performance data acquisition and processing. It is primarily aimed at various applications in industries such as telecommunications, aerospace, military, and industrial automation. The HBG76's advanced features, robust technologies, and exceptional characteristics make it a standout choice for professionals requiring precise and reliable data handling.

One of the hallmark features of the HBG76 is its high-speed sampling capabilities. The ADC can handle sample rates exceeding 1 GSPS (giga samples per second), enabling it to capture rapid signal dynamics with exceptional fidelity. This capability is particularly valuable in applications where timing is crucial, such as radar systems or high-frequency trading in finance.

The HBG76 incorporates cutting-edge analog-to-digital conversion technology, ensuring that the signal integrity is maintained throughout the conversion process. With a resolution of up to 16 bits, the ADC delivers impressive accuracy and detail, facilitating high-quality signal representation. This feature is essential for applications requiring precise measurement and analysis of data.

Another significant aspect of the HBG76 is its versatility in connectivity options. The device supports various communication interfaces, including USB, Ethernet, and SPI, making it compatible with a wide range of systems. This flexibility allows users to integrate the ADC seamlessly into existing hardware setups, enhancing overall efficiency and ease of use.

In terms of power efficiency, the HBG76 is designed with advanced low-power technologies that optimize its energy consumption without compromising performance. This feature is particularly beneficial for battery-operated devices and remote applications where power availability may be limited.

The robust design of the HBG76 ensures longevity and reliability in demanding environments. Its rugged casing provides protection against dust, moisture, and temperature extremes, making it suitable for outdoor use and harsh industrial settings.

Overall, the ADC HBG76 stands out as a powerful tool for data acquisition and processing, boasting high-speed sampling, excellent resolution, versatile connectivity, energy efficiency, and durability. Whether in research laboratories, industrial monitoring, or advanced telecommunications systems, the HBG76 is engineered to meet the evolving needs of modern applications, driving innovation across diverse sectors.
Top Page Image Contents