ADC PWR-AVIS 2.3 Technical Description, Table 2. PWR AVIS Technical Specifications

ADCP-61-814 ∙ Issue 1 ∙ April 1999

2.3 Technical Description

	Table 2. PWR AVIS Technical Specifications
PARAMETER		SPECIFICATION
Dimensions (Chassis)
Height		3.5 inches (8.9 cm)
Width		19.0 or 23.0 inches (48.3 or 58.4 cm)
Depth		10.0 inches (25.4 cm)
		Can be recessed 2.0 inches (5.1 cm)
Operating Voltage (Powered Chassis)
48 VDC		± 20%
120/240 VAC		± 20%, 47–63 Hz
Power Consumption		4 Watts, Max.
RIU Interface Connectors		BNC or F- type
Access Jack Interface		LCJ (0.177 inch diameter)
Electrical Performance
(Passive –20dB Access Card)
Bandwidth		0 to 300 MHz
Impedance		75 ohm nominal
Insertion Loss
RIU		0.33 dB nominal – 0.40 dB maximum
RIU and LCJ		0.50 dB nominal – 0.75 dB maximum
Monitor Level		21.5 ± 1.5 dB below signal level (1 MHz to 300 MHz)
Return Loss
RIU		–40 dB minimum
RIU and LCJ		–25 dB minimum
Contact Resistance		Less than 30 milliohms
Electrical Performance
(0 dB Baseband Video Card)
Bandwidth		15 Hz – 6 MHz
Impedance		75 ohm nominal
Crosstalk		Greater than –70 dB isolation adjacent channels,
		15 Hz to 6MHz
Monitor Short Circuit		1 hour
Monitor Level		± 1.5 IRE
In IRE
In dB		0 dB ± 62 mdB
Return Loss		Greater than –35 dB, 15 Hz to 6 MHz
Signal to Noise Ratio		70 dB
Diff Gain		0.20%
Diff Phase		0.2 degrees
Chroma-Luma Delay		± 10 ns
Chroma-Luma Gain		± 100 mdB
Gain Frequency		58 IRE

(continued)

Page 10

© 1999, ADC Telecommunications, Inc.