ADCP-61-814 ∙ Issue 1 ∙ April 1999

4

3

2

1

OUT

IN

CHASSIS GROUND

6967-B

Figure 13. Chassis Ground Terminal

OUT

TO 110 VAC TO –48VDC CONVERTER IN

(OPTIONAL)

CLASS 2

SPARE SPARE –48V (1) RET (1) –48V (2) RET (2)

PS1 ALM A

PS1 ALM B

PS2 ALM A

PS2 ALM B

TEST

AVIS

12248-B

TO OFFICE –48V FUSE PANEL

Figure 14. Office Power Connection

3.2 Cabling

Run and Cable the chassis as follows:

1.Obtain NE circuit IN and OUT assignments from local support staff.

2.Label all IN and OUT cables to identify NE associated with each card IN and OUT jack. Ensure that the NE OUT cable terminates to the RIU OUT and the NE IN terminates to the RIU IN.

3.Route the cables from the NE to the rear of the chassis.

Route circuits 1 through 10 on the right side of the rack, as viewed from the rear. Route circuits 11 through 16 on the left side of the rack. See Figure 15.

Page 14

© 1999, ADC Telecommunications, Inc.