Monitoring System Activity and Performance

152-402-145-02, Issue 2

 

 

Monitor Performance Event Log Config Inventory Rlogon Help

H2TU-C DS-1 Alarm History

------------------------------------------------------------------------------

Alarm

First

Last

Status

Count

 

 

 

 

 

LLOS

04/10/00 00:00

04/15/00 00:45

ALARM

12

LAIS

 

 

OK

0

DBER

04/10/00 00:37

04/10/00 00:45

OK

7

Press: C(l)ear Alarm History

------------------------------------------------------------------------------

Press <Space> to cycle

through

 

Interface : H2TU-C DS-1

 

choices and <Enter> to

view

 

Statistics :

Alarm History

 

ID: xxxx--xxxx--xxxx--xxxx

04/15/00 12:30:01

H2TU-C

System: Alarm

Figure 17. H2TU-C DS1 Alarm History Screen

Table 7. H2TU-R DS1 Alarm Descriptions

Screen Alarm

Front-Panel Alarm

Description

 

 

 

RLOS

RLOS

Remote Loss of Signal— Loss of the H2TU-R DS1 input signal.

RAIS

RAIS

Remote Alarm Indication Signal—Indicates an AIS (all ones) pattern is being received at

 

 

the H2TU-R DS1 input port. By default AIS-CI (a) is sent towards the network.

RAI

RRAI

Remote RAI - Remote Alarm Indication at the H2TU-R—Indicates an RAI alarm (yellow)

 

 

from the CPE with errors from the line unit or network.

TX RAI-CI

TRCI

Transmit RAI-CI - Remote Alarm Indication at the H2TU-R—Upon reception of an RAI

 

 

(yellow alarm) from the CPE, the H2TU-R sends a RAI-CI towards the network if the

 

 

network signal received at the H2TU-R is clear. If the network signal is impaired (LOS, AIS

 

 

or LOF), then the RAI is passed on to the network unaltered. This is applicable to SF or

 

 

ESF framing. In an all SF environment, RACI must be enabled to convert SF RAI to SF

 

 

RAI-CI.

PRM-NE

PRMN

Performance Report Monitoring - Near End—The count of the PRM-NE register at the

 

 

H2TU-R exceeds the 10-6BER threshold at 648 events since 12:00:00 AM.

PRM-FE

PRMF

Performance Report Monitoring - Far End—The count of the PRM-FE register at the

 

 

H2TU-R exceeds the 10-6BER threshold at 648 events since 12:00:00 AM.

DBER

DBER

Bit Error Rate—The DS1 BER has exceeded the built-in 24-hour threshold limits of

 

 

approximately 10-6.

(a)AIS-CI is a modified AIS alarm pattern. Equipment not suited to detect AIS-CI still detects this signal as an AIS. AIS-CI is sent toward the network indicating that an LOS (RLOS) or AIS (RAIS) has been received from the CPE.

20

June 16, 2000

H2TU-R-402