ADCP-50-304 • Issue 19 • June 1999 • Section 6: Installation

4.3Automatic Alarm Reset Jumper Installation

The automatic reset jumper must be installed before the module is installed in the chassis. Each module with the alarming feature has automatic reset and store jumper contacts in the lower right corner of the component side as shown in Figure 6-7. The alarm automatically resets when the jumper is on the left set of contacts. The jumper may be stored (i.e., the alarm does not automatically reset) on the right set of contacts.

INTERLOCKED

GROUP JUMPER

1564-A

ALARM

JUMPERAUTOMATIC ALARM

RESET JUMPER

Figure 6-7. Jumper Locations

Page 6-9

© 1999, ADC Telecommunications, Inc.