ADCP-50-304 • Issue 19 • June 1999 • Section 7: Operation

Table 7-4. Change Switch Selection

ACTION/DISPLAY

DISPLAY DEFINITION

Enter 1. Switch from the Select Operation

l. Normal (A) – Selects Equipment channel A on

Menu to display the present switch status

 

A/B Switch Modules.

followed by: Select Switch Action

2.

Substitute (B) – Selects Equipment channel B on

l. Normal (A)

 

A/B Switch Modules.

2. Substitute (B)

 

3.

Invert (A/B) – Reverses the Equipment channel

4. Configuration Switch

 

A/B selection on A/B Switch Modules.

Ctrl X To Exit

 

4. Configuration Switch – Allows selection of one

(--) >

 

 

of five predefined switch configuration presently

 

 

stored in memory.

 

Ctrl X – Redisplays the Select Operation Menu.

Enter the desired switch action from the

 

 

Select Switch Action Menu.

 

 

Selection of any of the options 1 through 7

 

 

on the Select Switch Action Menu Displays:

 

 

Card Selections — Key in Card Position(s)

 

 

or A for all.

 

 

Ctrl X to Exit

 

 

Followed by one of the following

 

 

as determined by the selection from the

 

 

Select Switch Action Menu: Switch

 

 

to (A) Normal Switch to (B) Substitute

Allows one or more A/B Switch Module to

Invert Switch Status Switch to Monitor

be switched to the selected configuration.

Break to Equipment Break to Line

 

 

(--) >

 

 

 

Ctrl X – Redisplays the Select Switch Action Menu.

Enter the card position numbers (0 to 15)

 

 

of the A/B Switch Modules to be switched

Switching actions have occurred as commanded.

to the selected configuration. Use commas

as delimiters, or a dash if a range is entered.

Switch status as defined in Table 7-2.

If all A/B Switch Modules are to be

 

 

switched to this configuration, enter A.

 

 

Command Action Complete

 

 

Chassis No. xx Module

 

 

# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Switch status as defined in Table 7-2.

Sw Status

 

 

or

 

 

Current Application Module

 

 

# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Switching actions have not occurred as commanded.

Sw Status Failed Act Command Action

 

 

Incomplete Retry Command?

1.

Yes – Reattempts last switch action.

l. Yes

2.

No – Does not reattempt last switch action,

2. No

 

and redisplays the Select Switch Action Menu.

Ctrl X To Exit

 

 

 

(2) >

Ctrl X – Redisplays the Select Switch Action Menu.

 

 

 

 

Page 7-14

© 1999, ADC Telecommunications, Inc.