ADCP-50-304 • Issue 19 • June 1999 • Section 7: Operation

Table 7-5. Change Switch Status

 

 

ACTION/DISPLAY

DISPLAY DEFINITION

Enter 3. Status from the Select

l. Display Status – Redisplays the current status

Operation Menu to display:

 

followed Action Menu.

Select Status Action

2. Save Current as Configuration – Allows storage

l. Display Status

 

of the place of one of the five presently stored

2. Save Current as Configuration

 

configurations.

Ctrl X To Exit

 

 

(1) >

 

 

To save the current configuration enter 2.

xxxxxxxxxxx – Eleven-character name of a previously

Save Current as Configuration from the

stored configuration. Up to five configurations can be

Select Status Action Menu.

stored, each with a different eleven-character name,

This entry displays:

Undefined configurations are initially labeled ??????

Select Configuration to Display or Replace

 

 

l. xxxxxxxxxxx

 

 

2. xxxxxxxxxxx

 

 

3. xxxxxxxxxxx

Ctrl X – Redisplays the Select Status

4. xxxxxxxxxxx

 

 

5. xxxxxxxxxxx

 

 

Ctrl X To Exit Action Menu.

 

 

(--) >

 

 

Select the configuration memory location in

Allows comparison of the two configurations before

which the current configuration is to be

actually overwriting the stored values with the current.

stored. Entry of this selection shows two

l.

Yes – Allows overwriting to be performed.

status displays; the first shows the switch

2.

No – Redisplays the Select Status Action Menu

configuration as currently defined, and the

 

for selection of a different configuration to be

second shows the switch configuration of

 

 

overwritten.

the selected configuration to be overwritten.

 

Ctrl X – Redisplays the Select Status Action Menu.

These displays are followed by:

 

 

Replace xxxxxxxxxxx with Current Status?

 

 

l. Yes

 

 

2. No

 

 

Ctrl X To Exit

 

 

(2) >

 

 

Enter l. Yes if the current configuration

 

 

is to be stored at the selected location.

 

 

Note: The previous contents of this

 

 

configuration memory will be lost after

 

 

the current configuration is stored.

 

 

This entry displays:

 

 

Configuration Name

 

 

Selection

Allows entry of a name for the new configuration to be

Key in up to Eleven Characters

for Configuration Name

stored.

Ctrl X To Exit

 

 

(??????) >

 

 

Enter the eleven-character name to

 

 

store the configuration. This displays:

 

 

Configuration xxxxxxxxxxx

xxxxxxxxxxx — Name of configuration

Saved followed by the Select

(up to eleven-characters).

Status Action Menu.

 

 

 

 

 

Page 7-16

© 1999, ADC Telecommunications, Inc.