surround |
|
|
|
|
|
| |
rear left | Note: If space permits, install surrounds | ||||||
|
| ||||||
| |||||||
|
| to minimize localization effects. | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.6 Input Settings
Input Settings shows information about the current state of operation of the
Highlight INPUT SETTINGS in the SETUP menu and press Select on the remote. You will see a screen similar to the following :
INPUT SETTINGS
AUDIO=VIDEO 3
VIDEO=VIDEO 3
MODE=5 CH STEREO
DYNAMIC RANGE=N/A
CENTER WIDTH=N/A
DIMENSION=N/A
DO NOT SAVE AND EXIT
SAVE AND EXIT
The available choices in each of the fields can be selected with the Left or Right arrow buttons on the remote; con- firm the choice with Select button.
AUDIO = identifies the selected audio input
VIDEO = identifies the selected video input
MODE = indicates the surround mode of the selected input (DOLBY DIGITAL, DTS, PRO LOGIC II, HALL, STEREO, and 5 CH STEREO).
DYNAMIC RANGE = indicates the dynamic range currently selected (100%, 75%, 50% and 25%) in Dolby Digital mode only, or N/A for the other modes.
Dimension = This parameter is used when listening in Prologic II Music mode, it changes the level balance from front speakers to back speakers, much the same way the fader adjust works in some car audio systems.
Center Width = This adjustment is used when listening to Prologic II Music Mode. It changes the amount of sound coming out of the center speaker. Adjust this parameter for best over all imaging between the front left/Right and center speaker.
Highlight SAVE & EXIT and press Select to save the altered settings and return to the SETUP menu. Otherwise, select DO NOT SAVE & EXIT to leave without saving any channel.
ADCOM