G R C - 8 0 0
main | vid 1 | vid 2 | vid 3 |
vid 4 | vid 5 | tuner | CD |
power |
| mute |
|
|
|
| volume |
tape | ext5.1 | d.range |
|
stop |
|
| mode |
|
| setup |
|
I |
| select | I |
pause |
|
| play |
1 | 2 | 3 | test |
4 | 5 | 6 | bal |
7 | 8 | 9 | backs |
+10 | 0 | random | repeat |
| AM pre/tune |
| |
| FM | RDS tuning |
|
m1 m2 m3 m4
sleep backlight dim
For example, if the m1 button is programmed in Group 1 mode to turn on the TV, turn on the audio receiver, turn on the VCR, and then turn on the satellite receiver, it will perform the same series of commands whenever the m1 button is pressed IF main, vid 1, vid 2, or vid 3 sources are selected at the time you select that macro. If you’ve programmed a Group 2 macro, it will send out an identical command sequence whenever vid 4, vid 5, tuner, or CD inputs are selected.
2.4 Programming Macro Initiator Buttons:
1.Press either the Group 1 or Group 2 source selector button (main or vid 4 respectively) and the mute button simultane- ously. Hold both buttons until the red status LED and the input selector button remain lighted.
2.Press the macro initiator button (power, m1, m2, m3 or m4) you wish to program.
3.Select and press up to 10 buttons you wish to store in the macro. Both source selector and
function buttons count as individual commands. Remember that each macro can hold only up to 10 individual commands.
4.Press the tuning up button to save the macro. The red status LED and input selector button will blink twice to confirm pro- gramming and then turn off.
Please note:
•To add a power (on/off) command to the macro, use the mute button in place of the power button.
•The tuning up/down buttons cannot be used in a macro sequence.
Deleting Macro Initiator Buttons:
1.Press either the Group 1 or Group 2 source selector button (main or vid 4 respectively) and the mute button simultane- ously. Hold both buttons until the red status LED and the input selector button remain lighted.
2.Press the macro initiator button (power, m1, m2, m3 or m4) you wish to delete.
3.Press the tuning up button. The red status LED and input selector button will blink twice to confirm deletion of the macro.
24 ADCOM
