AdderView MATRIX MP Installation and Use Page 34
3.6.6 AUTOMATIC LOGOUT
Accessed from menu: SETUP OPTIONS
Settings: DISABLED, ENABLED
The AdderView enables you to restrict access to your computers on a login basis. If
a user forgets to logout when they have finished accessing the AdderView then the
user console may unintentionally be left with full access to all the computers. The
AdderView may be set to automatically logout unattended user consoles when the
screen saver kicks in. This reduces the risk of security problems by preventing user
consoles remaining in a permanent “logged-in” state when there is no keyboard or
mouse activity. The automatic logout feature is only enabled when the screen saver
feature is active (i.e. not disabled).
3.6.7 KEYBOARD COUNTRY and DEFAULT COUNTRY
Accessed from menu: SETUP OPTIONS
Settings: AUTOMATIC, MANUAL, DISABLED
Some computers query the keyboard to find out its country code and key layout.
These computers use this information to configure the way that they interpret the
keyboard data coming from the keyboard and so it is important for the correct
country information to be supplied. Not all keyboards report country information and
two different styles of keyboard may be connected to the AdderView. Consequently
in AUTOMATIC mode the AdderView will attempt to query both the keyboards that
are attached to try and find a country code (user port 1 is tested first). If a country
code is not found then the AdderView will use the DEFAULT COUNTRY code
specified by the user. In MANUAL mode, the connected keyboards are not queried
for country information and instead the DEFAULT COUNTRY value is reported to all
computers that request country information. In DISABLED mode no country
information is supplied to computers requesting country information.