AdderView MATRIX MP Installation and Use Page 63
Step 4 - Power off the AdderView MATRIX MP
Remove the power from the MATRIX MP.
Step 5 - Power on the AdderView with the UPGRADE switch ON
Attach the power adapter to the AdderView whilst the UPGRADE switch is ON. The
green USER display should now show a lower case 'u'. This indicates that the
AdderView is ready to be upgraded.
The display should now show:
Step 6 - Run the upgrade program
The latest version of the AdderView MATRIX MP firmware is available from the
Adder Technology website at www.adder.com. The upgrade files will be supplied to
you as a group and consist of several files as explained below. These files should be
downloaded to the same directory on your computer.
1) A universal upgrade program
XPROMP.EXE
2) Binary code files for each of the processors within the AdderView (up to 3)
e.g. M216A129.HEX
M216B129.HEX
M216C129.HEX
These files use the following naming scheme. The first three numeric characters are
the model type (e.g. 216 is an AdderView MATRIX MP model 216 with 16 computer
ports). The fifth character is the processor designation. The last three characters
represent the firmware release version (e.g. 129 equals version 1.29).