What if...
The appliance will not work, even though it is switched on. ∙ Check if the power cable is properly connected.
∙ Check if the mains supply is in order, or if a circuit breaker has tripped. ∙ Check the temperature control for correct setting.
There is a power failure.
∙ Keep the doors of your refrigerator closed.
∙ Frozen food will not be affected if the power failure lasts less than a few hours.
∙ If the power failure lasts longer, it is best to cook the defrosted food and then
The interior light does not switch on. ∙ Check the power supply.
∙ Check the installation of the light bulb.
∙ Unplug the power cable before checking the light bulb. ∙ Replace if necessary.
The high temperature alarm icon is ( or is not) illuminated
The high temperature alarm is not active for 24 hours after on the power.
If the actual temperature of the freezer compartment is warm then the alarm icon (fig l) on the display lights up. The alarm icon dims when the actual temperature of the freezer compartment cools down.
The high temperature alarm may show for the following reasons.
a)A large quantity of warm food has just been loaded into the freezer.
b)Warm air has entered the freezer compartment.
c)The freezer door has been left open for a long time
If the high temperature alarm remains on for more than 24 hours, please contact the nearest Defy Service Centre.
The alarm and an error message are displayed.
Should the self diagnostics detect a system failure, the alarm icon (fig l) and the relevant er- ror message will be displayed.(E0, E3, ..etc.)
Please contact the nearest Defy Service Centre immediately.
The fuzzy control algorithm will in the meantime be activated to preserve the food as best as possible until the failure can be repaired.
The alarm icon will dim if the failure is rectified.
The actual temperature display oscillates
∙ This is normal and may be caused by: The fridge door being opened frequently, load- ing warm packages inside the fridge or leaving the fridge door open for a long period of time .
PAGE 11 OF 15
