TG6561E(e).book Page 44 Tuesday, July 13, 2010 1:50 PM

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Base no power

L The handset has lost communication with the base

or

unit. Move closer to the base unit and try again.

No link.

L Unplug the base unit’s AC adaptor to reset the unit.

Reconnect AC

Reconnect the adaptor and try again.

adaptor.

L The handset’s registration may have been cancelled.

 

Re-register the handset (page 29).

Check Phone Line

L The supplied telephone line cord has not been

 

connected yet or not connected properly. Check the

 

connections (page 10).

Error

L Recording was too short. Try again.

Failed

L Phonebook copy failed (page 21). Confirm the other

 

handset (the receiver) is in standby mode and try

 

again.

Incomplete

L The receiver’s phonebook memory is full. Erase the

 

unwanted phonebook entries from the other handset

 

(the receiver) and try again.

Memory Full

L The phonebook memory is full. Erase unwanted

 

entries (page 20).

 

L Message memory is full. Erase unwanted messages

 

(page 35).

 

L The call barred list memory is full. Erase unwanted

 

entries (page 29).

Use rechargeable

L A wrong type of battery such as Alkaline or

battery.

Manganese was inserted. Use only the rechargeable

 

Ni-MH batteries noted on page 4, 7.

You must first

L You must subscribe to a Caller ID service. Once you

subscribe to

receive caller information after subscribing to a Caller

Caller ID.

ID service, this message will not be displayed.

44Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Page 44
Image 44
Panasonic KX-TG6562E, KX-TG6561E operating instructions Error messages, Display message Cause/solution