Additional information | 12 |
Problem | Remedy |
No sound from the | • If you selected W.Stereo, the volume on the wireless speaker may be |
wireless speaker. | turned down too low. |
|
|
Horizontal stripe noise | • If there a piece of A/V equipment with an antenna near the transmitter, |
interference on a TV set | move the transmitter away from the antenna input terminal of the AV |
near the transmitter. | equipment. |
|
|
The POWER indicator | • It is likely that the system is malfunctioning. Ask your nearest Pioneer |
goes out when the switch | authorized service center or your dealer to carry out repair work. |
is on or the system is in |
|
operation. |
|
|
|
Error Messages
Message | Description |
Child Lock | • This message appears when the front panel buttons are pressed when |
| the child lock feature is active. See Child lock setting on page 74 for more |
| on switching on/off the child lock. |
|
|
Rec Mode On | • Blinks rapidly for 2 seconds when an operation is prohibited because |
| the Recording Mode is on (see Recording mode on page 82). |
|
|
Phones In | • Blinks rapidly for 2 seconds when an operation is prohibited because |
| headphones are connected. |
|
|
96k Stereo | • Blinks rapidly for 2 seconds when an operation is prohibited because |
| the source is digital 88.2 or 96kHz PCM. |
|
|
No Surr. SP | • Blinks rapidly for 2 seconds when an operation is prohibited because |
| there is no surround speaker output. |
Normal / Wide / Left Side/ • Blinks rapidly for 2 seconds when an operation is prohibited due to the
Right Side / W. Stereo | wireless speaker setting. |
|
|
Muting | • Blinks rapidly for 2 seconds when an operation is prohibited because |
| the sound is muted (press the MUTE button to turn the sound on). |
|
|
Exit | • Appears briefly when a menu is automatically exited after a set period of |
| inactivity. |
|
|
SR+ Error | • Appears when there is a communication problem between the unit and |
| the plasma display. Check all connections and retry. |
|
|
87
En
