04Getting started
Using the wireless speaker system
The wireless speaker supplied with your system can be used for multichannel sound with your main setup, or as a second stereo speaker system.
STANDBY/ON
WIRELESS
SYSTEM SETUP
SHIFT
ENTER
POWER | WIRELESS | STEREO MODE | ||
| VOLUME | |||
MODE |
| |||
OFF ON |
|
| ||
| W.SURROUND | W.STEREO | MIN | MAX |
1Switch the wireless speaker off and the main unit into standby.
2Press SYSTEM SETUP.
3If it’s not already selected, use
(cursor left/right) to select ‘Wireless?’ then
press ENTER.
The current setting is shown in the display.
4 Use (cursor up/down) to select ‘W.Surr.’ or ‘W.Stereo’ then press ENTER.
•W.Surr. – Sounds going to the surround left and right channels are heard through the wireless speaker (see below for placement options).
•W.Stereo – Any source playing through the main system is heard in stereo through the wireless speaker (multichannel sources will be downmixed to stereo).
Front left | Center | Front right | Wireless |
|
|
| |
|
|
| speaker |
| Subwoofer | Listening position | |
|
|
| (sub room) |
Listening position (main room) |
| ||
5Set the WIRELESS MODE switch on the wireless speaker to the same mode you selected above.
•If the mode of the wireless speaker and the DVD receiver don’t match, loud noise may be output from the wireless speaker.
6Switch the main unit and wireless speaker back on.
If you selected W.Stereo, start playback and adjust the STEREO MODE VOLUME control as necessary.
If you selected W.Surr. continue to the next step.
7Press WIRELESS repeatedly to select a wireless listening mode.
Choose between the following options:
•Normal – Use for surround sound with the wireless speaker placed behind the listening position.
Front left | Center | Front right |
Subwoofer
Listening position
Wireless speaker
42
En
