Connecting up | Pioneer S-DV9, XV-DV9 specs

Connecting up

02

•These speaker terminals can be under HAZARDOUS VOLTAGE. When you connect or disconnect the speaker cables, to prevent the risk of electric shock, do not touch uninsulated parts before disconnecting the power cord.

•Do not connect any of the supplied speakers to any other amplifier. This may result in malfunction or fire. This system is designed for best performance when connected to the supplied speakers. We do not, therefore, recommend connecting and using other speakers with this system.

1Twist and pull off the protective shields on each wire.

2Connect to the speaker terminals on the rear of the unit.

Match the colored wire with the color-coded label (above the tabs), then insert the colored wire into the red (+) tab and the other wire with the black (–) tab.

3Connect to the speaker terminals on the rear of the speakers in the same way.

•Remove the supplied non-skid pads from the paper, and stick four onto the base of each satellite speaker. Actual speakers supplied may differ from those shown.

4Connect the WIRELESS (IN) jack on the transmitter to the WIRELESS (OUT) jack on the rear panel of the receiver, using the supplied RCA stereo cord.

The wireless speaker system can be used for multichannel sound with your main setup, or as a second stereo speaker system.

5Connect the supplied AC adapter to the DC IN inlet on the rear panel of the unit, then plug into a power outlet.

Transmitter

AC adaptor

IN R

L

To power outlet

ANTENNA

UND

L						AM LOOP
		AUDIO				ANTENNA
		AUDIO	OUT	IN	IN
		COAXIAL IN	OUT	IN	IN
		COAXIAL IN	L		L
WIRELESS			L		L	FM
OUT						FM
OUT		LINE 2				UNBAL
		LINE 2	R		R	75
			R		R	75
R	L		LINE 1		TV

XV-DV9

•Do not use any AC adapter but the one provided with this system.

13

En

Image 13

Pioneer S-DV9, XV-DV9 manual Connecting up

Contents

XV-DV9 For XV-DV9 Location Rear of the unitFor XW-DV1WS Operating Environment Following does not apply to the Asian and Oceanic models LASERPRODUCTCLASS1 Voltage selector For XV-DV9 only Contents Surround sound and other settings Using the timerVideo Adjust menu Initial Settings menu Widescreen TV users Standard TV users Recording mode Troubleshooting General Before you start FeaturesBefore you start Chapter What’s in the box Using the remote control Disc / content format playback compatibility Before you start File format used by digital still cameras Jpeg file compatibility Connecting up Chapter Connecting upConnecting the speakers and wireless speaker system Connecting up Placing the speakers Before mounting Wall-mounting the center speaker Connecting using the S-video output Connecting up Connecting to your TV Connecting using the component video output Listening to TV audio through this system When TV format is set to PAL Using the SR+ mode with a Pioneer plasma display Connecting up Using this unit with a Pioneer plasma displayTo switch SR+ mode on/off, press SR+ Shift + Connecting up Pull off the protective shields of both AM antenna wires Connecting up Connecting the supplied antennasAssembling the loop antenna AM loop antenna FM wire antenna Connecting the power Controls and displays Chapter Controls and displaysFront panel 16 15 18 17 16 Controls and displays Speaker indicators Timer indicatorsRPT and RPT-1 12 2 PRO Logic II Controls and displays Remote control Tune + Cursor buttons, Enter and tuning buttonsST + QUIET/MIDNIGHT Program Shift + 1 Timer Shift + 6Repeat Shift + 2 Random Shift + 3 Channel indicators Wireless speakerControls and displays Transmitter CH 1 CH 2 CH 3 CH Power indicator Wireless Mode switchTuned indicator Getting started Switching on and setting upGetting started Chapter Setting the clock Using the Room SetupGetting started Button Setting up the remote to control your TV Playing discs Getting started Using the on-screen displays Press OPEN/CLOSE to open the disc tray Load a disc Basic playback controls Resume and Last Memory Using the front panel controlsButton What it does Resume and Last Memory Press Exchange to open the disc tray Changing discsPress Exchange or OPEN/CLOSE to close the disc tray DVD-Video disc menus Why won’t the disc I loaded play? Listening to the radio Video CD/Super VCD PBC menus Improving poor FM reception Press Enter to save the station presetMemorizing stations Tune to a frequency Listening to other sources Listening to station presetsSinging karaoke Press System Setup Getting started Using the wireless speaker systemSwitch the main unit and wireless speaker back on Front left Center Front right Press Surround to select the ‘Auto’ listening mode Auto listening modeListening to your system Listening to your system Chapter Use the cursor up/down buttons to adjust the setting Dolby Pro Logic II Music settingsListening to your system Listening in surround sound Use the cursor up/down buttons Using Front Surround Listening to your system Using the Advanced Surround effects To adjust the effect level Listening with headphonesListening in stereo Djusting the Advanced and Front rround effect level Listening to your system Enhancing dialogue Using Quiet and Midnight listening modesListening with a virtual surround back speaker Press Sound Mode Listening to your system Adjusting the bass and trebleTo adjust the sound To select ‘Bass’ or ‘Treble’ Playing discs Chapter Playing discsScanning discs Playing in slow motion Using the Disc Navigator to browse the contents of a discFrame advance/frame reverse Looping a section of a disc Using repeat playTo resume normal playback, select ‘Off’ from the menu During playback, press Home Menu and select ‘Play Mode’ Select ‘Repeat’ from the list of functions on the left Using random playSelect a repeat play option Select a random play option Press Home Menu and select ‘Play Mode’ Creating and editing a DVD program listSelect ‘Program’ from the list of functions on the left Select ‘Create/Edit’ from the list of program options Press Enter to add the highlighted item to the program list Creating and editing a non- DVD program listAdd further items to the program list in the same way To play the program list, press play Program Program Step Disc Folder Track Searching a disc Select a search modeOther functions available from the program menu Press Enter to start playback Switching DVD audio language Playing discs Switching subtitlesSwitching audio channels when playing a Video CD/ Super VCD Zooming the screen Displaying disc information Switching camera anglesOSD disc information Front panel display information Viewing Jpeg discs Using the Jpeg Disc Navigator and Photo BrowserViewing Jpeg discs Chapter Playing a Jpeg slideshow Viewing Jpeg discs Using the Photo BrowserUse the cursor buttons Navigate Using the timer Chapter Using the timerSetting the wake-up timer Set the switch-off time Setting the sleep timer Using the timerTurning the wake-up timer on/off Press Timer Shift + 6 twice to reach the timer menu Use To check how much time is left, repeat steps 1 Using the System Setup menu Surround sound and other settings ChapterSurround and sound setup options SR+ control options for Pioneer plasma displays Surround sound and other settings Function setting for DVD input Setting the channel levelsFunction setting for TV input Function setting for L1 input When you’re done, press Enter to exit test tone setup Video Adjust menu Chapter Video Adjust menuVideo Adjust Creating your own presets Initial Settings menu Chapter Initial Settings menuUsing the Initial Settings menu Video Output settings Language settings Initial Settings menuDisplay settings SettingOption Options Registering a new passwordParental Lock Setting/changing the Parental Lock Changing your passwordSetting/changing the Country code Select ‘Password Change’ System Setup menu options in standby Optional system settingsAdditional information Additional information Chapter Additional information Resetting the systemWatching Ntsc on a PAL TV MOD. PAL Titles, chapters and tracks Using and taking care of discsDVD Video regions Handling discs Hints on installation Proper installation and maintenance of this systemStoring discs Discs to avoid Wireless speaker system maintenance and precautions AC adapter and power cord caution Moving the wireless speakerRadio wave reflections Radio wave caution Scope of operation For safety in operationStatic electricity Connecting auxiliary components Additional information Connecting external antennasExternal AM antenna External FM antenna Press Sound Mode Use the Use Recording modeButtons to select ‘Rec Mode?’ To select ‘R.Mode On’ or ‘R.Mode Off’ ProblemRemedy Additional information TroubleshootingGeneral DVD/CD/Video CD/Super VCD player Problem RemedySound Demo shows STANDBY/ON button Tuner WMA/MP3/JPEG discs Connecting external antennas on Wireless speaker system Message Description Error Messages Additional information Screen sizes and disc formats Selecting languages using the language code listWidescreen TV users Standard TV users Country code list Additional information Language code list Marantz Additional information Preset code list Dolby Digital Additional information Glossary Additional information Specifications Wireless speaker Digital Wireless Speaker System XW- DV1WS GeneralAccessories Digital Wireless Speaker System Transmitter Pioneer Corporation