Setting up Your
Dialogue VCO
There are three steps involved in set-
ting up your Dialogue VCO.
•Insert four AA rechargeable
NiCad batteries for back-up in
case of AC power outage.
•Decide if you want the phone to
sit on a desk or hang on the wall.
•Connect the telephone components.
Installing the Backup Batteries
If there is a power outage, the
Dialogue VCO will operate for 4 - 8
hours with four AA rechargeable
NiCad batteries (not included). If the
phone is not in use, the batteries will
stay charged for several months.
To Install New Batteries:
1. Slide open the battery compart--
ment cover on the bottom of the
telephone (Figure 3).
2. Install four fresh AA recharge-
able NiCad batteries. Be sure
to observe battery polarity as
imprinted on the base of the
compartment.
Connecting for Desk or Wall Mount
Set the dial mode switch to T(tone)
if you have touch tone service.
Set the switch to P(pulse) if you have
rotary dialing.
Desktop Use:
1. Connect the telephone line cord
and the handset cord to the
telephone as shown in Figure 4.
2. Plug the AC adapter into an
electric outlet and into the tele-
phone as shown in Figure 4.
SELECT
SPACE
BACKSPACE
RELAYAUTO
ANS
REL
MGS
POWER
LEDSIGNAL
LED
M!M2M3M4M5
SHIFT
Figure 4 - Connecting the Components
MANUAL
AUTO
Insert
batteries
here
Press in
here
to open
battery
compart-
ment
Figure 3 - Accessing the Batteries
4