Using Your Dialogue VCO
Incoming Voice Volume
1.Press the AMPLIFY button as shown in Figure 8 to turn the incoming voice amplifier on or off. When AMPLIFY is on, the AMPLIFY indicator comes on.
HOLD*PROG | 0 | P |
| # |
E |
| |||
| FLASH | REDIAL | ||
TONE | AMPLIFY |
| VOL | |
|
|
| ||
HI
Figure 8 - AMPLIFY Button and
Indicator
2.Adjust the volume in the handset by moving the VOL slide control in Figure 9. With AMPLIFY on, incoming volume will be up to 30 dB louder.
HOLD*PROG | 0 E | FLASH | REDIAL |
TONE | AMPLIFY |
| VOL |
|
| ||
LO | HI |
|
|
Figure 9 - Volume Slide Control
Incoming Voice Tone
The Dialogue VCO provides extra amplification at the level of sound
frequency you need to boost. To iden- tify the sound frequency range that best suits your needs, follow these steps:
1.When you hear a voice on the line, press the AMPLIFY button as shown in Figure 8.
2.Adjust the TONE slide control as in Figure 10 to suit your hearing.
HOLD*PROG | 0 | P |
| # |
E |
| |||
| FLASH | REDIAL | ||
TONE | AMPLIFY |
| VOL | |
|
|
| ||
LO | HI |
|
|
|
Figure 10 - Tone Slide Control
Ringer Volume
1.You can adjust the RINGER VOLUME as high as 95+ dB. The settings available are OFF, LO and HI as shown in Figure 11.
RINGERDIAL
|
|
|
|
Off Lo Hi |
| T | P |
Figure 11 - Ringer Volume
6
