Before you start | 01 |
Putting the batteries in the remote control
•Open the battery compartment cover and insert the batteries as shown.
Use two AA/R6P batteries and follow the
indications ( , ) inside the compartment. Close the cover when you’re finished.
•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the system unit’s remote sensor.
•Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this system.
•Replace the batteries when you notice a fall off in the operating range of the remote.
Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
•Don’t mix new and old batteries together.
•Don’t use different kinds of battery
•Make sure that the plus and minus ends of each battery match the indications in the battery compartment.
•Remove batteries from equipment that isn’t going to be used for a month or more.
•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
H048 En
Using the remote control
Keep in mind the following when using the remote control:
•Make sure that there are no obstacles between the remote and the remote sensor on the system unit.
•The remote has a range of about 7 m at an angle of less than 30º.
Disc / content format playback compatibility
This player is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging. Note however that some disc types, such as record- able CD and DVD, may be in an unplayable
Audio CD Video CD |
Fujicolor CD
•KODAK Picture CD
•
is a trademark of Fuji Photo Film Co. Ltd.
9
En
