SmartView Multiscreen Installation and Use Page 31
4. SmartView Multiscreen configurationoptions
All the options described in this section are entered in SmartView Multiscreen
configure mode - see section 2.6 for instructions on entering configure mode.

4.1 Screen saver time delay

SmartView Multiscreen contains a programmable screen saver which will blank the
display after the set time delay with no keyboard or mouse activity. Simply typing at
the keyboard or moving the mouse will re-enable the display. The SmartView's 7-
segment display will flash whilst the SmartView Multiscreen is in screen save mode.
B1 - screen saver disabled (default)
B2 - Blank screen after 1 minute of inactivity
B3 - Blank screen after 2 minutes of inactivity
B4 - Blank screen after 4 minutes of inactivity
B5 - Blank screen after 8 minutes of inactivity
B6 - Blank screen after 12 minutes of inactivity
B7 - Blank screen after 16 minutes of inactivity
B8 - Blank screen after 20 minutes of inactivity

4.2 Autoscan ‘lock on’ mode and delay time

SmartView Multiscreen can be set to select each channel in turn for a period of time
set by the autoscan delay time. Autoscan mode is entered by typing the hotkey keys
together with ‘A’. By default, only those channels which have a powered up
computer connected to them will be scanned. Sometimes it may be desirable to
scan all channels, even if the attached computer is switched off (this will simply
show a blank screen when it is selected). All the SmartView Multiscreen’s ports will
be scanned if option L2 is selected. Some applications may also require the
SmartView Multiscreen to power on in autoscan mode. This feature can be selected
using the L3 or L4 options.