Press ENT to enter the following screen. Use the Up and Down bu
defaults.
Load Default
Load Default
Ok
If Load Default OK, this will be displayed on the LCD as shown below.
Load DefaultPress ESC to return to the main menu then use the ENT button to select. This function resets all
settings to their factory default. This function helps the system recover from errors caused by an
illegal operation.
10-07.Adv Setup
Load Default
Copy HPAIf this function is set to "ON", the system will completely copy the data in a source HDD's host
protected area.
10-10. Adv Setup
Copy HPA
The default is "OFF". Use the ENT, Up and Down buttons to change this to "On".
USB Auto-Link
NOT AVAILABLE
Link OptionNOT AVAILABLE
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/