www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

PreScan Source

PreScan HDD is used to check if the source hard disk can be accessed properly.
It also tests the read speed.
Choose option 3 from the menu:
3. PreScan Source
HDD : 1 232.9GB
Press ENT to begin scan. The LCD will display the following info
Scan-90MB/s 1%
230.6GB 00:00:27
Once the scan is complete, the LCD will display the corresponding results
PreScan OK!
4. ReScan BUS
ReScan Bus
Choose option 4 from the menu:
Press ENT to re-scan hardware. The LCD will display the following info.
Re-Scan BUS NOW?
Yes
When the scan is complete the LCD will display the following info.
Bus re- scan OK!
ReScan Bus allows swapping the source or target in and out without having to
reboot the system.