Step 1 is to define the name of the share. The share name will become the folder name on the drive.
Note: The shared folder name will be written to disk using all capital letters. If an existing folder of the same name appears and is not all capital letters, the NAS 4.0 considers that not a match and writes the same folder name in all capital letters anyway. This can cause unpredictable results if the drive is subsequently connected to a computer. If a folder exists of the same name with all capital letters, it will be shared without harming any data.
Step 2 is to select the drive the share is to be created on. The drive is identified by the drive letter and partition number, the vendor and model, and the mount point.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
