Power Switch: This is the switch to power devices connected to the power supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of enclosure must be turned on first.
Reset Button: Not operational.
Buzzer Reset: Pressing the button stops the overheat buzzer from making a sound. The buzzer will make a sound when temperature inside the storage rack exceeds the temperature setting on the Thermal Managment card.
Note: Buzzer reset switch does not silence the port multiplier buzzer.
Power LED: Lights up when the power switch is turned on.
Temp LED: Lights up when the temperature setting inside the storagerack exceeds the setting on the thermal card.
Fan LED: Normally on when fan is operational. If an abnormal condition is detected, the LED flashes.
HDD LED: Not operational.
RAID Rack with Port Multiplier Compatibility
Note: When configured as a set of individual drives, the Port Multiplier will only work with a Port Multiplier aware host. Identify your host controller and check with its hardware manufacturer if you are unsure. Addonics offers several Port Multiplier capable host adapters.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
