Addtron Technology P201 manual Uncrating, Important Safeguards, Warnings, Rpm Only, Technician

P201, P171, P131, 175 RPM	P201HD, P171HD,175 RPM		P202, P172, 175/320 RPM
Standard Speed	Standard Speed Heavy Duty		Dual Speed
P203, P173, 300 RPM		P171SD, 175 RPM
	High Speed		Sander

Your new Powr-Flite®Floor Machine will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your Powr-Flite®Floor Machine was inspected by a Quality Control

Technician.

UNCRATING

Your Powr-Flite®Floor Machine was protectively packed to prevent damage in shipment. We suggest that upon removing the unit from its carton, you carefully inspect it for any possible damage in transit. If damage is discovered, immediately notify the transportation company who delivered your machine. As a manu- facturer, we are unable to act upon any claim for concealed damage; you must originate the claim.

the electrical ground. For maximum protection against electric shock, use a circuit that is protected by a ground fault circuit inter- rupter. Consult with your electrical contractor.

WARNING: To prevent damage to the power cord, do not let the pad, pad driver or wheels touch the power cord when the machine is running. Always lift the power cord over the machine.

WARNING: Make sure all labels, decals, warning, cautions and instructions are fastened to the machine.

IMPORTANT SAFEGUARDS

This machine is designed to be safe when used to perform the functions specified in this Operator’s Manual. Should damage occur to electrical or mechanical parts, the machine should be repaired by the manufacturer or competent service station before using in order to avoid further damage to the machine or physical injury to user. Your floor machine is equipped with a safety switch lockout device designed for your safety. Do not attempt to bypass or defeat the safety lockout device. Never use any device to lock the power switch triggers in the ON position.

WARNINGS

READ THIS OPERATOR’S MANUAL!

WARNING: You must have training in the operation of this machine before using it.

WARNING: Machines can burn flammable materials and vapors. Do not use this machine with or near fuels, grain dust, solvents, thinners or other flammable materials.

WARNING: Do not operate this machine unless it is completely assembled.

WARNING: Do not use this machine as a step or to move furniture.

WARNING: When disconnecting power cord from electrical outlet, grasp the plug. Pulling it out by the cord itself can damage cord insulation and internal connection to plug. To prevent electric shock, always remove the electrical plug from the electrical outlet before doing any repairs or maintenance to this machine.

WARNING: To prevent injury, always remove the electrical plug from the electrical outlet before changing the polishing pad and before leaving the machine.

WARNING: To prevent injury, keep hands, feet and loose clothing away from the rotating pad.

WARNING: Maintenance and repairs must be done by authorized personnel only.

WARNING: Keep all fasteners tight. Keep adjustments according to specifications.

WARNING: Keep the electrical parts of the machine dry. For storage, keep the machine in a building.

WARNING: Always use a three-wire electrical system connected to

APPLICATIONS FOR FLOOR MACHINE (MODELS P201, P171, P201HD, P171HD and P131)

175 RPM ONLY

The Powr-Flite®175 RPM floor machine will operate in a wide variety of applications. The 175 RPM floor machine is the most versatile speed in the floor care industry.

APPLICATIONS OF 175 RPM STANDARD SPEED FLOOR MACHINES ON HARD FLOORS

•Spray buffing with a Powr-HD™ red spray buff pad and spray buff chemical, such as Powr-Glo®.

•Dry buffing a buffable finish with a Powr-HD™ tan, beige or white pad or Powr-Luster™ brush.

•Scrubbing with a Powr-HD™ green or blue pad or scrubbing brush, such as Powr-Scuff™.

•Stripping with a Powr-HD™ black pad and a stripping chemi- cal, such as Powr-Up®.

APPLICATIONS OF 175 RPM STAN- DARD SPEED FLOOR MACHINES ON CARPET

•Bonnet cleaning with a Powr-Sorb™ yarn bonnet and carpet maintainer chemical, such as Spin-Away®.

•Shampooing using a showerfeed shampoo brush and solution tank mounted to the hand containing carpet shampoo.

APPLICATION OF POWR-FLITE®

HEAVY DUTY 175 RPM FLOOR MACHINES (MODELS P201HD and P171HD)

The heavy duty standard speed floor machine may be used for spray buffing, dry buffing, scrubbing and stripping applications.

These heavy duty floor machines are specially recommended for long term aggressive scrubbing and stripping maintenance.

The P201HD & P171HD heavy duty floor machines are specially recommended for the following applications: