|
| Mercury Hub User Guide |
|
|
| Mercury |
|
| Specification | ||
Power requirements: |
|
|
|
Supply Voltage Range: | 100 - 240 Vac ±10% (Mains version) | ||
Supply Frequency: | 50 - 60 Hz (Mains version) | ||
OR | 2 x Mercury Controllers connected to ports 1 and 2 | ||
Maximum supply current: | 500 mAmps | ||
Typical supply current: | <100 mAmps | ||
Operating temperature range: | +50C to +500C | ||
Operating Humidity: | 80% maximum | ||
Storage temperature range: | |||
Environmental: | Indoor use at altitudes up to 2000m, Pollution Degree 1, | ||
| Installation Category II. | ||
| Voltage fluctuations not to exceed ±10% of nominal voltage | ||
Size: | 300mm (L) x 35mm (H) x 110mm (W) | ||
Weight: | 300 Grams | ||
Safety: | EN61010 | ||
EMC: | EN61326; 1997 +Amdt. A1; 1998 | ||
Ventilation: | There is no requirement for forced cooling ventilation | ||
Class 2 Insulation: | No protective Earth is required and none should be fitted. |
The host equipment must provide a suitable external
Fuse: | 1A 240 Vac Antisurge (T) HRC conforming to IEC 60127 |
Or MCB: | 1A, 240 VAC Type C conforming to BS EN 60898 |
Mounting
There is a fixing lug at each end of the Hub, with hole centres 317 mm apart. Use typically Number 6 x 1” Pan head screw with 6mm washer, torque down to 1.5 Newton metres.
RS232 Cable Lengths
Port number | Main Powered Hub | Mercury Powered Hub |
1 | 15 metres | 5 metres |
2 | 15 metres | 5 metres |
3 | 15 metres | 15 metres |
4 | 15 metres | 15 metres |
5 | 15 metres | 15 metres |
6 | 15 metres | 15 metres |
7 | 15 metres | 15 metres |
8 | 15 metres | 15 metres |
9 | 15 metres | 15 metres |
0 | 15 metres | 15 metres |
Ethernet Cable lengths |
| |
|
|
|
Port number | Main Powered Hub | Mercury Powered Hub |
1 | Refer to Cat5 standard | Refer to Cat5 standard |
2 | Refer to Cat5 standard | Refer to Cat5 standard |
Uplink | Refer to Cat5 standard | Refer to Cat5 standard |
Ensure that all power is |
|
|
switched off before |
|
|
installing or maintaining |
|
|
this product | Revision 1.5 | Page 6 of 6 |