If you need to make changes in the configuration of the scanner for specific applications, a full Programming Guide can be downloaded at:
http://www.adesso.com/PDF%20files/NUSCAN2100usersguide.pdf
13.Trouble Shooting
a. Problem: Nothing happens when you follow the operating instructions.
Possible Cause | Possible Solution |
Interface cables are | Check for loose cable connections. |
loose. |
|
|
|
b. Problem: Light comes on, but symbol does not decode.
Possible Cause | Possible Solution |
Scanner is not | Please refer Programming Guide and be sure to |
programmed for the | select the correct interface selection and ensure that |
correct | the scanner is programmed to read the type of |
type. | barcode you are scanning. |
|
|
Barcode symbol is | Check the symbol to make sure it is not |
unreadable. | scanning test symbols of the same barcode type. |
|
|
Distance between | Move the scanner closer to or further from the |
scanner and barcode | barcode. |
is incorrect. |
|
|
|
c. Problem: Symbol is decoded, but not transmitted to the host.
Possible Cause | Possible Solution |
Scanner is not | Please make sure the scanner is configured to the |
programmed for the | appropriate host type by scanning the corresponding |
correct host type. | programming barcode on the Programming Guide. |
|
|
10
