6.Installation

Insert the plug on the free end of the Communications Cable into the appropriate connector on the host as below described:

a. USB Connection

Host

b. PS/2 Connection

Host

Test Scanning

Do not hold the scanner directly over a barcode at 90˚. Scanning light bounces directly back into the scanner from the barcode label is known as specular reflection which will create a "dead zone" where decoding is difficult. So instead of a 90° head-on approach, tilt the scanner up to 60° forward or backward to achieve a successful decodes. Practice a few times to find what range of angles works best.

Maintenance

Cleaning the scan window is the only maintenance required. A dirty window may affect scanning accuracy.

Wipe the scanner window gently with a lens tissue or other material suitable for cleaning optical material.

4

Page 7
Image 7
Adesso 2100 Series manual Installation, Test Scanning, Maintenance, USB Connection Host PS/2 Connection