Operating Instructions
Remote control
1 BUTTON
2
9
8
7
Mode
S |
|
a |
|
v |
|
er |
|
T |
|
im |
|
er | Auto |
|
High
id M
ow L
3
4
5
6
1
The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button.
2Mode BUTTON
Used to select the operation mode.
Each time the Mode button is pressed, the operation modeis changed in sequence:
COOLING FAN ONLY COOLING
3 BUTTONS
Used to set room temperature in Cooling mode or used to set time in Timer mode. Temperature setting range is from 19 (66 ) to 31 (88 ).
4High BUTTON
Used to select the high fan speed mode.
5Mid BUTTON
Used to select the Mid (same as low) fan speed mode.
6Low BUTTON
Used to select the Low fan speed mode.
7Auto BUTTON
Used to select the Auto fan speed mode.
8Timer BUTTON
Used to set or cancel timer operation.
9Saver BUTTON
Used to select the
Indication symbols of LCD on remote control:
Signal transmit | Cooling | Fan only | |
Display set temp | |||
Auto fan speed | Low fan speed | Medium fan speed | Display set timer |
High fan speed |
The Above symbols are shown when the relevant mode is in use.
When Changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
11