AdobeAir CMC432 Control System, Motor & Cooling Pump, Why Evaporative Cooling?, Drain Pump

WHAT IT TAKES TO BE THE BEST COOLER. CLEANER. MORE EFFICIENT.

Factory Installed 2-Speed Motor – U.L. Recognized. Made to the strictest standards in the industry so it runs cooler and lasts longer with a 2-Year Warranty.*

Factory Installed Thermostatic Control System – Automatically maintains the desired temperature using the least amount of energy possible.

Factory Installed Cooler Pump – The best in the industry is U.L. Recognized and backed by a 2-Year Warranty.*

MasterCool Pad – Backed by a 5-Year Warranty, this durable long lasting and reliable cooling pad provides higher efficiency, greater comfort and lower energy costs than other pads.

Exclusive PolyBond® Finish – A 5-layer finish keeps the elements out and the quality in.

Dry Module – Separate wet and dry modules keep moisture away from vital working parts.

Dynamically Balanced Blower Wheel – Ensures quiet and efficient operation.

Water Distribution System – All steel construction ensures even water distribution for complete pad saturation and maximum cooling efficiency.

Factory Installed Drain Pump – Automatically keeps your cooler cleaner by reducing scale and build-up.

A Complete Packaged Cooling System

The MasterCool Contractor series includes motor, pumps, and thermostatic control. All components have been specifically designed to provide the maximum comfort at the minimum operating cost.

Control System

The factory installed control system is fully integrated with all electrical components, and even includes on-board buttons that allow testing of the motor, cooling pump and drain pump from inside the cooler. Standard thermostat wiring is used to connect the control box to the wall thermostat and all electrical components are U.L. Recognized. A safety disconnect switch is included as a convenient method to turn off power to the cooler when necessary.

Motor & Cooling Pump

Every MasterCool pump is U.L. Recognized, thermally protected, grounded and flame retardant. Our motors are equally impressive. With all-copper windings and superior construction, you’ll get years of reliable operation and superior energy savings.

What is so special about the MasterCool Pad?

The MasterCool evaporative pad is constructed of special cellulose material designed to give high absorbency with strong resistance to deterioration, extending the life of the pad and saving money. The cross-fluted design continually directs water to the air-entering side, inducing a highly turbulent mixing of air and water for optimum evaporation and maximum cooling efficiency.

Isn’t Evaporative Cooling just for dry desert climates?

While evaporative cooling is especially suited to dry desert climates, it is also effective in more humid areas. As temperatures rise throughout the day, relative humidity levels drop. Usually by midday, humidity levels have dropped to well within the range where MasterCool can provide relief from the heat.

Why Evaporative Cooling?

Evaporative Cooling is the affordable solution for cooling, providing economical cooling solutions for the environmentally and energy conscious

With Without Drain Pump Drain Pump

Drain Pump

The drain pump automatically replaces the stale, dirty water in the cooler with fresh, clean water every six continuous hours the cooler is in operation. Mineral deposits, algae and bacteria get washed out, so the water stays purer and the air stays virtually odor-free. The systematic flushing of the pan prevents unnecessary water usage and can save up to 3,000 gallons of water per month.

consumer. Evaporative Cooling works cleaner and better for just pennies a day.

Also Available in Up-Discharge Models

Combine the greatest efficiency and cooling power with a design to comply with even the strictest Homeowner’s Association CCRs.

COOL, CLEAN COMFORT ... NATURALLY.