EN | Setting up the ADSL Wireless Base Station |
|
|
Setup Wizard
Getting Started
Make sure that you have a working ADSL subscription and that the ADSL wireless base station is connected to the ADSL phone line. You can verify that the cable is connected correctly by looking at the light on the front of the ADSL wireless base station. The 'ASDL' light should be on solid after approximately 1 minute.
Wireless settings
In step 2 you can change the Wireless settings of the ADSL wireless base station. For easy installation it is advised to keep the default settings. If you later would like to change any of the wireless settings you can do so via the menu in the ADSL wireless base station.
ADSL settings
In step 3 you have to enter the settings applicable to your ADSL Internet Service Provider (ISP) subscription. For easy installation you can select your ISP from a list of predefined ADSL ISP's per country.
If you cannot find your ISP in the list you can enter the settings manually. To do so select as 'Country' 'others' and select from the 'Internet Service Provider' list the ADSL protocol your ISP is using (this should be mentioned in the documentation you received from your ISP).
Confirm
Step 4 displays the ADSL settings you've entered and that will be used to configure the ADSL wireless base station. Please check that the settings comply with the information you received from your ADSL ISP subscription. If you want to make changes click the 'Back' button to go back to Step 3.
After you've clicked ‘SAVE SETTINGS’ a message will appear ‘Your data is being saved’.
18
