Appendix E. Terminal Mode Commands
E-4 Express 4110/4120 User Manual 61200176L3-1
Additional Commands
Other commands available from the terminal mode are given below:
Download/Uploading Configuration
The Express 4110/4120’s configuration can be captured to a text file using
the download command. The text file can be edited if required. Upload
of the configuration can be accomplished by sending the text file to the
Express 4110/4120 in terminal mode. A baud rate of 9600 is strongly rec-
ommended when uploading. As soon as the upload has been completed,
type “save” to save the new configuration to flash. A “r eset” co mmand or
power cycle 10 seconds after the save command is recommended to
ensure that the new configuration is complete.
save Saves the configuration to non-volatile RAM (flash).
mac Returns the MAC address for the Express 4110/4120.
version Returns the firmware version and routing stack v ersion.
reset Resets the unit.
exit Leaves terminal mode and returns to menus.
download Downloads complete configuration to the terminal screen for
capture.