Quick Startup Guide
Quick Start-6 Express 4110/4120 User Manual 61200176L3-1
23. Set up the computer workstation’s IP and IPX parameters as
instructed by the network administrator. The Express 4110/4120’s IP
address should be the computer’s default gateway.
When the computer which is attached to the local LAN attempts to access
a host on the access server, the Express 4110/4120 will dial the number
provided in the Connection List profile. The Express 4110/4120 will pro-
vide one of two B-channels based on traffic demand and POTS port usage.
If no packet traffic is transmitted or received for the specified number of
seconds, the Express 4110/4120 will disconnect the link until a computer
on the local LAN again attempts to access a host on the access server.
If Novell’s IPX protocol is being used, the link must be dialed first in the
Dial menu to obtain the server and route information needed by the com-
puter to boot up. Advanced users can use the Express 4110/4120’s Probe
feature to periodically dial the access server to obtain the route and server
information, thereby removing the need to manually dial the first time.