Manuals / ADTRAN / Computer Equipment / Network Card

ADTRAN 850 specifications For a T1 Port

Models: 850

1 10
Download 10 pages 46.44 Kb
Page 8
Image 8

FCC regulations require that the following information be provided in this manual to the customer:

1.This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom of the chassis.

2.An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68-compliant. See Chapter 2, Installa- tion, for details.

3.If your telephone equipment (TA 850) causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn’t practical, you will be notified as soon as possi- ble. You will be advised of your right to file a com- plaint with the FCC.

4.Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper operation of your equipment. If they do, you will be given advance notice to give you an opportunity to maintain uninterrupted service.

5.If you experience trouble with this equipment (TA 850), please contact ADTRAN at (256) 963-8000 for repair/ warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or until you are sure the equipment is not malfunctioning.

6.This unit contains no user-serviceable parts.

7.The following information may be required when applying to your local telephone company for leased line facilities.

For a T1 Port:

Service Type

REN/

FIC

USOC

 

 

SOC

 

 

1.544

Mbps - SF

6.0N

04DU9-BN

RJ-48C

1.544 Mbps - SF and

6.0N

04DU9-DN

RJ-48C

B8ZS

 

 

 

 

1.544

Mbps - ESF

6.0N

04DU9-1KN

RJ-48C

1.544

Mbps - ESF

6.0N

04DU9-1SN

RJ-48C

and B8ZS

 

 

 

ISDN

 

6.0N

04DU9-ISN

RJ-48C

For an FT1 Port:

 

Service Type

REN/

FIC

 

 

SOC

 

1.544

Mbps - SF

6.0N

04DU9-BN

1.544 Mbps - SF and B8ZS

6.0N

04DU9-DN

1.544

Mbps - ESF

6.0N

04DU9-1KN

1.544 Mbps - ESF and B8ZS

6.0N

04DU9-1SN

ISDN

 

6.0N

04DU9-ISN

NOTE

When connecting FT1 port towards the network, a suitable crossover cable is required.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio frequencies. Opera- tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own ex- pense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

WARNING

Change or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

8

Issue 2, August 2001

61200373L1-5B

Page 7 Page 9
Page 8
Image 8
ADTRAN 850 specifications For a T1 Port
Page 7 Page 9

850 specifications

ADTRAN 850 is a high-performance digital subscriber line (DSL) solution designed to meet the ever-evolving demands of telecommunications providers and their customers. This innovative platform enables operators to deliver high-speed broadband services over existing copper infrastructure, significantly enhancing the user experience.

One of the standout features of the ADTRAN 850 is its support for G.fast technology. G.fast is a next-generation access technology that allows for data rates of up to 1 Gbps over short distances. Utilizing advanced modulation techniques, G.fast is capable of providing ultra-broadband speeds to customers residing within close proximity to the distribution point. This capability significantly expands the service options for operators seeking to improve their last-mile connectivity.

The ADTRAN 850 also integrates with VDSL2, allowing service providers to leverage their existing DSL networks effectively. VDSL2 enhances bandwidth capabilities and can deliver speeds of up to 100 Mbps downstream and 100 Mbps upstream. This dual compatibility ensures that operators can maximize their investments while transitioning to more advanced technologies.

In terms of characteristics, the ADTRAN 850 is built with robustness and scalability in mind. It is designed to accommodate a wide range of deployments, from small rural communities to dense urban areas. The platform supports multiple service types, including residential and business services, and allows for customizable bandwidth allocation based on user needs.

Moreover, the ADTRAN 850 is equipped with advanced management capabilities. Its web-based management interface provides operators with actionable insights into network performance and customer usage patterns. This ensures proactive maintenance and optimization of the network, which is essential for maintaining high service quality.

Security features are also prominent in the ADTRAN 850, with built-in encryption and secure access protocols to protect sensitive customer data. This focus on security aligns with increasing regulatory requirements and customer expectations regarding data privacy.

In conclusion, the ADTRAN 850 is a versatile and powerful DSL solution that stands out for its support of G.fast and VDSL2 technologies, remarkable scalability, and robust management capabilities. Its ability to provide high-speed broadband services over existing copper lines makes it an essential tool for telecommunications providers looking to enhance their service offerings and improve customer satisfaction in today’s digital age.