ADTRAN AHDSL2 Hdsl Maintenance Menu, RTRV-ALM-HDSL Command, Additional Hdsl Maintenance Commands

HDSL MAINTENANCE MENU

From the Maintenance Menu, enter “6” to display the HDSL Maintenance Menu as shown below.

HDSL Maintenance Menu

1.	ALW-MSG-HDSL
2.	INH-MSG-HDSL
3.	RMV-HDSL
4.	RST-HDSL
5.	RTRV-ALM-HDSL	← Retrieve existing HDSL alarms for the H2TU-C

6.RTRV-ATTR-HDSL

7.RTRV-COND-HDSL

8.SET-ATTR-HDSL B. Maintenance Menu M. Main Menu

RTRV-ALM-HDSL Command

Input Format

The RTRV-ALM-HDSL command is used to retrieve existing HDSL alarms for the H2TU-C card.

<RTRV-ALM-HDSL

AID[ALL]= RT-1-21 NTFCNCDE[ALL]= CR, MJ, MN, NR CONDTYPE[ALL]= MSGLOST, LOSW, DCCONT,

T-SNRL, INCRAI-CI, T-LA SRVEFF[ALL]= NSA, SA

Additional HDSL Maintenance Commands

←Severity of alarm to retrieve

←Alarms available to retrieve

←Can choose between non-service affecting NSA and service affecting SA

The following commands are not listed in the Maintenance Menu, but are available for execution.

INIT-REG-HDSL Command

Input Format

The INIT-REG-HDSL command is used to clear the HDSL PM data for the H2TU-C card.

<INIT-REG-HDSL	← Slot of interest
AID[ALL]= RT-1-21

MONTYPE[ALL]= ES, SES, UAS, MS, LA, SNRMIN ← PM parameters that can be cleared

LOCN[]= NEND, FEND,	← Location to clear
TMPER[]= 1-DAY, 15-MIN,	← Time periods available to clear

RTRV-PM-HDSL Command

Input Format

The RTRV-PM-HDSL command is used to retrieve HDSL PM data for the H2TU-C card.

<RTRV-PM-HDSL	← Slot of interest
AID[ALL]= RT-1-21
MONTYPE[ALL]= ES, SES, UAS, MS, LA, SNRMIN ← PM parameter to retrieve
LOCN[]= NEND, FEND,	← Location to retrieve
TMPER[]= 1-DAY, 15-MIN,	← Time periods available to retrieve

61221002L2-5B B-3