Ethernet over Bonded Copper

ADTRAN, Inc.

901 Explorer Boulevard Huntsville, AL 35806

P.O. Box 140000 Huntsville, AL 35814-4000

256 963 8000 voice

256 963 8030 fax

877 457 5007 fax back

General Information

800 9ADTRAN

info@adtran.com

www.adtran.com

Pre-Sales

Technical Support

888 5ADTRAN

support@adtran.com

www.adtran.com/support

Where to Buy

800 827 0807

www.adtran.com/where2buy

Post-Sales

Technical Support

800 726 8663

support@adtran.com

www.adtran.com/support

Regional Offices

Dallas, TX 972 830 9070 Denver, CO 303 471 9150 Kansas City, KS 800 471 8649 Newark, NJ 800 471 8656

Ontario, Canada 416 290 0585 Quebec, Canada 877 923 8726 San Antonio, TX 888 223 7671

International Inquiries

+1 256 963 8716 voice

+1 256 963 6300 fax

international@adtran.com

www.adtran.com/international

MX3112

Product Specifications

Front Panel Features

Controller module: Activity, Alarm, DS3 Status, DSX-1/E1 Status, DSX-1/E1 Test, and Ethernet 1-4 LEDs

Alarm cut-off button

Interfaces

T3 Interface

Channelized DS3

Line build out: No adjustments required 0 to 450 feet

Framing format: M13 and C-bit parity

Line rate: 44.736 Mbps

Line interface: Dual 75 ohm BNC coax female connectors

10/100Base-T Ethernet Interface(s)

IEEE 802.3

DSX-1 Interface(s)

Line build out: 0 to 655 feet

Line rate: 1.544 Mbps

Line code: AMI or B8ZS

Line interface(s): Dual 64-pin champ connectors

E1 Interface(s)

Line build out: 0 to 655 feet

Line rate: 2.048 Mbps

Line code: HDB3

Line interface(s): Dual 64-pin champ connectors

Diagnostics

DS3 Network

ANSI T1.107 compatible loopbacks

Line loopbacks

DSX-1 Ports

Local and network loopbacks

CSU and NIU loopbacks

Mechanical

Dimensions: 1.7H X 8.6D X 17W (in.) 44H x 218D x 435W (mm)

Weight: 5.5 lbs (2.5 kg)

for a fully redundant configuration

Clocking

Alarms

External alarm contacts

Normally open pinout

Front panel alarm cutoff switch

Electrical

Power: ±24 VDC or -48 VDC, 36 W

Regulatory Standards

NEBS Level 3

UL 60950 and ETL

IEC/EN 60950 RoHS compliance

Management

VT100 Terminal Interface

EIA-232 compatible, female DB-9 adapter

MX3 4-Port 10/100Base-T Ethernet Module

4-Port Ethernet Module

Deployed with redundant or non-redundant MX3112 Controller Cards

Interfaces the MX3112 Controller Card with the four client 10/100Base-T signals

The four Ethernet ports located on the MX3ETH4 Module provide the protection and physical interface for the MX3112 Controller Card

The ports can be accessed using standard CAT 5 cable with an RJ-45 connector

Environmental

Operating temperature: -40°C to 65°C

Storage temperature: -40°C to 85°C

Relative humidity: GR-63-CORE

Product Includes

Mounting ears for 19-in. and 23-in. racks

Ordering Information

Equipment

Part #

MX3 Chassis

1189001L1

 

 

 

MX3 Fan Module *

1189007L1

MX3112 Controller

1189901L1

 

 

 

MXETH4

1189902L1

ADTRAN is an ISO 9001, ISO 14001 and a TL 9000 certified supplier

6118990xLx-8C April 2007

Copyright©2007 ADTRAN, Inc. All rights reserved.

DS3 Network

* Fan Module Required

Network: Receive from DS3 network

Local: Internally generated

Bonded DS1s

Line: Referenced from selected DS1

Local: Internally generated

Loop: Receive from DS1

Specifications are subject to change without notice. ADTRAN is a registered trademark of ADTRAN, Inc. All other registered trademarks and trademarks men- tioned in this publication are the property of their respective owners.

Page 2
Image 2
ADTRAN MX3112 Front Panel Features, Interfaces, Diagnostics, Mechanical, Clocking Alarms, Electrical, Regulatory Standards