ADTRAN none quick start Serial DIM Commands

®

Quick Start Guide

For more detailed documentation, visit us online at www.adtran.com.

NetVanta Serial Dial Backup Interface Module (DIM) P/N 1200886L1

SERIAL DIM COMMANDS

alias <“text”>

Populates the ifAlias OID (Interface Table MIB of RFC2863) for all physical and virtual interfaces when using SNMP management station.

caller-id override [always <number> if-no-CID <number>]

Configures the unit to replace caller ID information with a user-specified number. Use the no form of this command to disable any caller ID overrides.

always <number>	Always forces replacement of the incoming
	caller ID number with the number given.
if-no-CID <number>	Replaces the incoming caller ID number with
	the number given only if there is no caller ID
	information available for the incoming call.

description <text>

Identifies the specified interface, both physical and virtual (for example, circuit ID, contact information, etc.), using up to 80 alphanumeric characters.

dialin

Enables the modem for remote console dial-in, disabling the use of the modem for dial-backup.

init-string <string>

Specifies an initialization string using standard AT commands. Use the no form of this command to return to the default initialization string.

<string>	Specifies an initialization string using standard
	AT commands. This string must start with AT
	and cannot contain spaces. The default string
	is ate0q0v1x4\n0.

shutdown

Disables the interface (both physical and virtual) so that no data will be passed through. Use the no version of this command to turn on the interface and allow it to pass data.

Quick Start Guide, 61200886L1-13B, July 2006 Technical Support 1-888-4ADTRAN (1-888-423-8726) Copyright © 2006 ADTRAN, All Rights Reserved