NT1 ACE4 User Manual
Powering with the NT1 ACE4 Power Supply
The ADTRAN NT1 ACE4 Power Supply, part number 336012VUR01, provides power to the NT1 ACE4 . To connect
the NT1 ACE4 to the external power supply, perform the fol- lowing steps (see Figure
1.Connect the power supply to the NT1 ACE4 at the POWER jack located on the NT1 ACE4 rear panel.
2.Plug the power supply into the nearest wall outlet sup- plying 120 VAC, 60 Hz.
3.On the NT1 ACE4, verify that the ERROR indicators are illuminated. After approximately 15 seconds, the READY indicators should flash at a 1 Hz rate. Should any of the indicators fail to operate as stated, see the section Troubleshooting on page 8.
NETWORK
100 - 120
VAC
|
| LOCAL | POWER |
|
|
|
|
|
|
|
|
READY |
|
| 4 |
1 | 2 | 3 | |
ERROR |
|
|
|
NT1ACE4 |
|
|
|
Figure 1-5. Power Supply Connection
6 | NT1 ACE4 User Manual |
