Advantech ADAM-4562 3. Driver and Utility Installation

3. Driver and Utility Installation

In order to use a PC to control serial devices connected to the ADAM-

4562, you must first have a host running Windows 98/2000/XP.

Following are the installation instructions to set up the ADAM-4562.

1. Insert the ADAM-4562 Driver utility diskette into the CD drive

(e.g. E:\) on the host PC.

2. Plug in the USB connector of ADAM-4562 then system will detect the new device

automatically and show the hardware wizard. Please choose the item Install from a

list or specific location if it is the first use on this PC.