Advantech FPM-3150 Series A.3 Installing Driver for Windows 2000/XP, Optical, Sensor board

Optical

•Visible light transmission: 75% typical (>74% @ 550 nm test)

•Clarity: Clear Finish - 25%, Antiglare Finish - 15%

Sensor board

•Chemical strengthened glass with 4 H hardness standard. (Test condition: ASTM D3363-92A)

Ball drop test

•Able to bear a 225 g steel ball dropped from 660 mm elevation without breaking

Environmental Specifications

•Operating Temperature Range: -20° C ~ +50° C, 2 weeks at 50° C / 90% RH.

•Storage Temperature High: +70° C, 240 hours at ambient humidity.

•Storage Temperature Low: -40° C, continuous at ambient humidity.

•Accelerated Aging: 100 hours at 60° C / 95% RH.

•Thermal Shock: 25 cycles (one cycle is 30 min. dwell alternating from -40 to +85° C with less than 10 min. transfer time.

A.3 Installing Driver for Windows 2000/XP

The touchscreen has drivers for Windows 2000 and Windows XP. You should read the instructions in this chapter carefully before you attempt installation.

Note 1: The following windows illustrations are examples only. You must follow the flow chart instructions and pay attention to the instructions which then appear on your screen.

Note 2: Install the HMI CD Driver into the system CD-ROM (D:\ means CD-ROM)

15 AppendixA