Advantech FPM-3150 Series user manual Appendix B Standard Timing Set Serial Data for Expansion

Appendix B Standard Timing Set Serial Data for Expansion

B.1 Setting serial data for expansion

The twelve kinds of timings below are already programmed in this mod- ule. The input synchronous signals are automatically recognized.

Resolution	Vertical Frequencies
	56 Hz		60 Hz		70 Hz		72 Hz		75 Hz
	Pass	Fail	Pass	Fail	Pass	Fail	Pass	Fail	Pass	Fail
640 x 480			V				V		V
800 x 600	V		V		V		V		V
1024 x 768			V		V		V		V

Note 1: Even if the preset timing is entered, a little adjustment of the functions such as Horizontal period, CLK-delay and display position, are required. The adjusted values are memorized in every preset number.

Note 2: This module recognizes the synchronous signals with near preset timing of the frequency of the HS and Vsync, even in the case that the signals other than the preset timing that were entered.

Note 3: Because adjustments may not fit, such as differing magnifying ratios or, in the case that you use it except for the display timing that was pre- set.

FPM-3150 Series User Manual 34