Advantech PCA-6185 Starting SCSISelect, If you have difficulty viewing the display, press F5 to

Support Removable Disks	Disabled	Disabled
BIOS as Fixed Disks2	Boot only
	All Disks
BIOS Support for Bootable	Enabled, Disabled	Enabled
CD_ROM2
BIOS Support for Int 13	Enabled, Disabled	Enabled
Extensions2

Remarks:

1.Setting is valid only if Multiple LUN Support is enabled

2.Settings are valid only if host adapter BIOS is enabled.

7.6Starting SCSISelect

Follow these steps to start SCSISelect:

1.Turn on or restart your system.

During the startup process, pay careful attention to the messages that appear on your screen.

2.When the following message appears on your screen, press the Ctrl-A keys simultaneously (this message appearsfor only a few seconds):

Press <Ctrl><A> for SCSISelect (TM) Utility!

3.From the menu that appears, use the arrow keys to move the cursor to the option you want to select, then press ENTER.

Note:	If you have difficulty viewing the display, press F5 to
	toggle between color and monochrome modes. (This
	feature maye not work on some monitors.)

Exiting SCSISelect

Follow these steps to exit SCSISelect:

1.Press ESC until a message prompts you to exit (if you changed any settings, you are prompted to save the changes before you exit.)

2.At the prompt, select YES to exit, then press any key to reboot the computer. Any changes you made in SCSISelect take effect after the computer boots.

PCA-6185 User’s Manual 72