„Set the timeout value 3000 (3 sec.) in the SET TIMEOUT field and set the delay value 2000 (2 sec.) in the SET DELAY field, then click the START button. The Timeout Countdown field will countdown the watchdog timer and display 5000 (5 sec.).

„Before the timer counts down to zero, you can reset the timer by clicking the REFRESH button. After you click this button, the Timeout Countdown field will display the value of the SET TIMEOUT field.

„If you want to stop the watchdog timer, you just click the STOP button.

Hardware Monitor

CL

When the Monitor application is executed by clicking the button, hardware monitoring data values will be displayed. If certain data values are not supported by the platform, the correspondent data field will be grayed-out with a value of 0.

For More detail PCM-3362 software API user manual, please contact your dealer or Advantech AE. We also include these manuals in this CD.

Chapter 4 Software Introduction & Installation

47

PCM-3362 User Manual

Page 55
Image 55
Advantech PCM-3362 user manual Hardware Monitor