132986190.qxd 16/02/2005 11:56 Pagina 20

Preparing the wash cycle

Detergents and additives

Which detergent and additive?

Use only detergents and additives for washing machines. Follow the manufacturer’s instructions.

How much detergent?

The quantity depends on:

the load:

if the manufacturer does not provide any indications on the amount of detergent for small loads, use about one third less than the suggested amount for half loads and half the amount for very small loads;

the degree of soil:

use a small amount of detergent for lightly soiled garments. Judge the amount according to the detergent manufacturer’s instructions and size of the load;

the water hardness:

the harder the water, the more detergent required. Instructions according to water hardness are given on the detergent pack.

Liquid detergent

Liquid detergent can be poured directly into the main wash compartment of the dispenser drawer immediately before starting the programme, or a special dispenser can be used that is placed directly in the drum. Mea- sure the detergent according to the manufacturer’s instructions.

Adding a water softener (descaling product)

A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent can then always be adjusted to degree of hardness I (= soft). Information on water hardness can be obtained from your local water supply authority.

Information on water hardness

Degree of hardness

 

German degrees °dH

 

French degrees °TH

 

 

 

 

 

 

 

 

 

 

I=Soft

 

0-7

 

0-15

 

 

 

 

 

II=Medium

 

7-14

 

16-25

 

 

 

 

III=Hard

 

14-21

 

26-37

 

 

 

 

 

IV=Very hard

 

more than 21

 

more than 37

 

 

 

 

 

20

Page 20
Image 20
AEG 1046 EL, 1246 EL manual Detergents and additives