132986190.qxd 16/02/2005 11:56 Pagina 39

Installation

Unpacking

All transit bolts and packing must be removed before using the appli- ance.

Using a

spanner,

 

unscrew

 

and

 

remove the 2 rear

 

bottom

screws.

 

Slide out the 2

 

plastic

pins.

Lay

 

the machine on its

 

back, taking

care

 

not to squash the

P1129

 

hoses. This can be

avoided by placing one of the corner pack- ing pieces between the machine and the floor.

P0001

1 2

Remove the polystyrene block from the

bottom of the machine and release the 3 two plastic bags.

Carefully slide out the left-hand bag remov-

P1124

ing it towards the

 

 

right and then

 

 

downwards.

 

 

Slide out the

 

 

right-hand bag

 

 

removing it

 

 

towards the left

 

 

and then upwards.

 

 

Set the machine

P1126

P1127

 

 

upright and

 

 

remove the

 

 

remaining rear

 

 

screw. Slide out

 

 

the relevant pin.

 

 

Plug the open

 

 

holes with the

 

 

plugs which you

P1128

P0002

will find in the plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

39

Page 39
Image 39
AEG 1246 EL, 1046 EL manual Installation, Unpacking