Removing the filter
Open the grid and remove the stops M to take out the filter. See Fig. 6.
Carbon filter
●The activated carbon filter should only be used if you want to use the hood in recirculation mode.
●To do this you will need an original AEG activated carbon filter (available as an accessory).
●This filter cannot be cleaned or reused.
●As a general rule, the activated carbon filter should be changed once every four months.
●Mounting – Fig 11
a.Fit first rearwards on the proper seats.
b.Then fix frontwards the carbon filter using hooks C.
●Dismounting :
Unhook the carbon filter from its housing pushing hooks C.
11
●Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the rating plate located on the inside of the unit.
●The activated carbon filter can be ordered from AEG Servire Force.
14
