Description of the appliance
Display
The display shows the following information:
•if the programme selector dial is on the RESET O position, three flashing dashes appear immediately after pressing the ON/OFF button to indicate that the machine is ready to receive instructions for the required wash programme;
•duration of the selected wash programme, calculated automatically on the basis of the maximum recommended load for each type of fab- ric.
•Selected drying time (max. 2 hours and 10 minutes for cotton, 1 hour and 40 minutes for synthetics).
After the programme has started, the time remaining is updated every 10 minutes, and every 5 minutes during the last 20 minutes.
•When the programme has finished, three flashing zeros are dis- played;
•delayed start, programmed using the special button 
.
The selected delay (19 hours max.) is indicated in the display. The countdown is updated every hour, and every 5 minutes during the last hour.
•Heating phase. A dot to the right of the figures in the display indi- cates that the machine is heating the water.
•Incorrect option selection. If an option which is not compatible with the set wash programme is selected, the message Err is displayed.
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END 
pilot light comes on.
Prewash
Wash
Rinse
Rinse hold
Pump out
Spin
Dry 
End
15
